Three panels of the Lian Li O11 Air Mini computer case are made of mesh

The Lian Li assortment has been supplemented by the O11 Air Mini computer case, the three panels of which front, top, and side are made of a mesh with cells with a diameter of 1.5 mm. The construction also uses 4 mm thick aluminum panels and tempered glass panels of the same thickness.

The 400 x 288 x 384 mm case is designed for E-ATX motherboards (up to 280 mm wide), ATX, micro-ATX, or mini-ITX. There are two options for mounting the board, depending on which there are five or seven slots for expansion cards. The maximum card length is in any case 362 mm. As for other limitations, the PSU can be up to 200mm long, and the maximum CPU cooling height is 170mm.

Three 120mm or two 140mm fans can be installed on the top panel, two 120mm fans on the side, two 120mm or two 140mm fans on the front, and one 120mm on the back. Attachment points for two more 120mm or 140mm fans are on the bottom. In configurations with LSS, the front panel is suitable for a radiator with a length of 240 or 280 mm. The same possibilities are available from below and from above, and the sidewall can be used as a place for attaching a 240 mm radiator. The manufacturer installs two 140mm fans on the front and one 120mm on the back. They support PWM speed control.

The case can accommodate up to four 3.5 "drives and up to four 2.5" drives (instead of two 3.5 "drives, you can also install two 2.5" drives without any additions). The I / O panel has two USB-A and one USB-C connector.

The black case will cost $ 100, the white one - $ 110.

Post a Comment