Apple iPhone 14 Pro Max aluminum sheet drawings exposed

A person familiar with the matter said that Apple has started trial production of the iPhone 14 and plans to mass-produce it in August. At the same time, accessories manufacturers have also obtained the body data of the iPhone with a high probability, and are preparing to produce accessories such as mobile phone films and protective cases for the new iPhone. Yesterday, a netizen named "Apple Shenzhen Foxconn Producer" in the iPhone 14 bar exposed the aluminum plate drawings for the Apple iPhone 14 Pro Max accessories.

The drawings show that the iPhone 14 Pro Max uses a 6.7-inch screen with a body size of 160.71×78.58×7.85mm. Compared with the iPhone 13 Pro Max , the machine is 0.09mm shorter, 0.48mm wider and 0.2mm thicker.

It is worth mentioning that the camera module of the iPhone 14 Pro Max is seriously bulged, which is already 4.17mm higher than the body , which will cause the iPhone 14 Pro Max to shake severely when it is flat on the desktop. For users who want to protect the camera module with a phone case, this size also results in a heavier phone case.

The highlight of the iPhone 14 Pro Max camera module corresponds to the upgrade of the new camera. It was previously revealed that the iPhone 14 Pro / Pro Max will have a rear 48MP+12MP+12MP camera that supports 8K video recording. In other configurations, the iPhone 14 Pro/Pro Max will be equipped with A16 Bionic chip, 8GB memory, 128GB, 256GB, 512GB and 1TB versions of storage, support AOD screen display, support Face ID, and pre-installed iOS 16 system. In terms of battery life, the battery capacities of the iPhone 14 Pro/Pro Max are 3200mAh and 4323mAh respectively. In addition, the iPhone 14 Pro/Pro Max will use a new "pill + punch screen" instead of the previous notch screen.

Post a Comment

0 Comments