At 8 p.m. today, the Xiaomi Mijia water purifier 1600G will go on sale. The Xiaomi Mijia Water Purifier 1600G has an initial flow of 4.71L/min and water output of 4.25L/min. Officials claim that it can take a glass of water (150ml water cup) in 2.1 seconds. The Xiaomi Mijia Water Purifier 1600G uses a 100mm roll film. Compared with the Mijia water purifier 1000G previously released by Xiaomi, the water inlet pipe of the faucet of this water purifier has been upgraded to 3 branches, and the cross-sectional area of the water has increased by 164%.
The Xiaomi Mijia Water Purifier 1600G adopts PPC and RO dual filter elements, which can filter out sediment, and adsorb residual chlorine, calcium ions, magnesium ions, etc., with a heavy metal removal rate of 99.7%. At the same time, the Xiaomi Mijia Water Purifier 1600G will enter the automatic flushing mode after stopping water for a period of time to prevent secondary pollution and allow users to drink immediately.
The RO filter element of Xiaomi Mijia Water Purifier 1600G has a service life of six years, and the service life of the PPC filter element is two years. At the same time, the pure wastewater ratio of the Xiaomi Mijia water purifier 1600G is up to 3:1.
Xiaomi Mijia Water Purifier 1600G is equipped with an OLED smart display faucet, which displays the TDS value in real-time, and can remind filter replacement and fault alarm. At the same time, users can check the water usage details through the Mijia App to understand water consumption.
The Xiaomi Mijia Water Purifier 1600G has an LPD low water pressure mode, which can still provide purified water in high-rise buildings with low water pressure or during peak water use periods.
0 Comments